SAWS: Backflow Prevention Frequently Asked Questions
Aquifer Beaker

Edwards Aquifer

Aquifer Level 662.6'
11/17/17 - Official

The Edwards aquifer and its catchment area in the San Antonio region is about 8,000 square miles and includes all or part of 13 counties in south-central Texas.

Learn More »


image

Year-Round Watering Hours

Watering with an irrigation system or sprinkler is allowed any day of the week before 11 a.m. or after 7 p.m.

Learn More »


Close

Aquifer Level 662.6 | Year-Round Watering Hours

Login

Pay Your Bill Online

Already Registered? Login Now.

Forgot Your Password?

New User

Register for SAWS eBill

Don't Have An Account? Get Started Now.

Sign Up Now


Close
image

Frequently Asked Questions

  1. Why does SAWS need a Cross Connection Control and Backflow Prevention Program?
  2. What is backflow?
  3. What is a backflow prevention assembly?
  4. What is the process for installing/replacing a backflow prevention assembly?
  5. Why do backflow prevention assemblies need to be tested?
  6. How often does the backflow prevention assembly need to be tested?
  7. How can I contact a licensed backflow assembly tester?
  8. When requesting a test for my backflow prevention assembly, how much should I expect to pay for this service?
  9. What type of document needs to be returned to SAWS as proof that testing of the backflow prevention assembly was completed?
  10. Where can I find a copy of the "Test & Maintenance Report"?
  11. How can I verify that testing of my backflow prevention assembly has/has not been completed?
  12. Does a lawn irrigation system require a backflow prevention assembly?
  13. How long does a backflow prevention assembly last?
  14. What is considered a potential hazard?
  15. Has SAWS process for permitting or overseeing the inspection of new, relocated or repaired backflow prevention assemblies in the public right-of-way changed?
  16. Will an annual inspection continue to be required for backflow prevention assemblies located in the public right-of-way?
  17. What is backpressure backflow?
  18. What is back-siphonage?
  19. What is a cross-connection?


  1. Why does SAWS need a Cross Connection Control and Backflow Prevention Program?
    The program safeguards the public drinking water and protects the health of its customers by ensuring that any contaminants that could backflow into the public water supply system are isolated within the customer's internal distribution system.
  2. Back to Top

  3. What is backflow?
    Backflow refers to the reverse flow of nonpotable water, or other substances, through a cross-connection and into the piping of a public water system or customer's potable water system. Two types of backflow are backpressure backflow and back-siphonage.
  4. Back to Top

  5. What is a backflow prevention assembly?
    A backflow prevention assembly is a means or mechanism to prevent backflow. The basic means for preventing backflow is an air gap, which either eliminates a cross-connection or provides barrier from backflow. The basic mechanism for preventing backflow is a mechanical backflow preventer, which provides a physical barrier to backflow. The principal types of backflow preventers are the reduced-pressure principle assembly, the pressure vacuum breaker assembly and the double check valve assembly.
  6. Back to Top

  7. What is the process for installing/replacing a backflow prevention assembly?
    Proper permits must be acquired for installation of the backflow prevention assembly. Additional information can be obtained from the authority having jurisdiction in your service area.
  8. Back to Top

  9. Why do backflow prevention assemblies need to be tested?
    Mechanical backflow prevention assemblies have internal seals, springs, and moving parts that are subject to fouling, wear or fatigue. Also, mechanical backflow preventers and air gaps can be bypassed. Therefore, all backflow prevention assemblies have to be tested periodically to ensure that they are functioning correctly. Mechanical backflow prevention assemblies have to be tested with properly calibrated gauge equipment.

    Back to Top

  10. How often does the backflow prevention assembly need to be tested?
    In order to insure the proper operation of a backflow prevention assembly, it must be tested and certified upon installation and at least once a year thereafter by a licensed backflow tester.
  11. Back to Top

  12. How can I contact a licensed backflow assembly tester?
    A list of accredited companies can be found at SAWS Cross-Connection and Backflow Prevention Program. The list will also be provided with your annual test notice.
  13. Back to Top

  14. When requesting a test for my backflow prevention assembly, how much should I expect to pay for this service?
    It is to our understanding that fees ranges in price from $40 and up, so please call around when you are trying to schedule with a tester.
  15. Back to Top

  16. What type of document needs to be returned to SAWS as proof that testing of the backflow prevention assembly was completed?
    The licensed tester will complete a "Test & Maintenance Report" (T & M) documenting the results. The completed T & M form must be returned to SAWS Backflow Prevention Section.
  17. Back to Top

  18. Where can I find a copy of the "Test & Maintenance Report"?
    Test & Maintenance Reports can be found at the following:
    SAWS Test and Maintenance of Report Form - Domestic & Irrigation
    SAWS Test and Maintenance of Report Form - Fireline
    SAWS Backflow Requirements regarding “RECYCLED WATER USERS”
  19. Back to Top

  20. How can I verify that testing of my backflow prevention assembly has/has not been completed?
    Contact SAWS Backflow Prevention Inspection Section at backflowprevention@saws.org or 210-233-2910.
  21. Back to Top

  22. Does a lawn irrigation system require a backflow prevention assembly?
    Yes. Section 608.16.5, of the Plumbing and Fuel Gas Code, connections to lawn irrigation systems, states that the potable water supply to lawn irrigation systems shall be protected against backflow by a pressure-type vacuum breaker, a double-check valve assembly or a reduced pressure principle backflow preventer – depending on the degree of the site hazard.
  23. Back to Top

  24. How long does a backflow prevention assembly last?
    With proper maintenance and annual testing, backflow prevention assemblies have been known to last for many years.
  25. Back to Top

  26. What is considered a potential hazard?
    A potential hazard is defined as any possibility of pollutants, contaminants, and system or plumbing hazards. For example, fire protection systems, irrigation systems, gasoline refineries and stations, restaurants, hospitals and manufacturers.
  27. Back to Top

  28. Has SAWS process for permitting or overseeing the inspection of new, relocated or repaired backflow prevention assemblies in the public right-of-way changed?
    No. SAWS Backflow Prevention Section will continue to review all permits and utility drawings to ensure compliance with backflow prevention requirements, and will continue to oversee the installation and testing of the assemblies.
  29. Back to Top

  30. Will an annual inspection continue to be required for backflow prevention assemblies located in the public right-of-way?
    Yes. SAWS Backflow Prevention Section will continue to mail out a test due notice to all customers with a backflow prevention assembly. Testing requirements must be completed within 30 days of the test due notice.
  31. Back to Top

  32. What is backpressure backflow?
    Backpressure backflow occurs when the downstream side of the piping system is greater than the supply pressure in a public system or customer's potable water system. Backpressure can result from an increase in downstream pressure, a reduction in the potable water supply pressure or a combination of both. Pumps can create increases in downstream pressure; temperature increases in boilers, etc. Reductions in potable water supply pressure occur whenever the amount of water being used exceeds the amount of water being supplied, such as during waterline flushing, fire fighting or breaks in water mains.
  33. Back to Top

  34. What is back-siphonage?
    Back-siphonage is backflow caused by negative pressure (i.e. vacuum or partial vacuum) in a public water system or customer's potable water system. The effect is similar to drinking water through a straw. Back-siphonage can occur when there is a stoppage of water supply due to nearby fire fighting, a break in a water main, etc.
  35. Back to Top

  36. What is a cross-connection?
    A cross-connection is any temporary or permanent connection between a public water system or the customer's potable water system and any source or system containing nonpotable water or other substances.

    Common cross-connections:
    • Private wells – where the private well connection is connected to a service line receiving water from a public water supply. The untreated water could be pumped into the potable water supply which serves the home and the public water system.
    • Lawn sprinkler systems – where the stagnant/contaminated water from the sprinkler system could be drawn into the drinkable water supply for your home.

Back to Top